Hinged Assisted Lift Access Covers

Steelway's range of Hinged Assisted Lift Access Covers are designed for use on a variety of projects. Our hinged access covers are available with both flush fitting and upstanding options subject to the site requirements.

This range of hinged access covers and frames are designed for use on a variety of applications that require frequent opening. Also incorporating heavy gauge torsion springs for compliance with manual handling regulations. Available in a number of loadings in line with FACTA load classifications.

The range covers products that are suitable for pedestrian areas through to chambers that need to take vehicular loadings. The complete range is designed to accept utility padlocks (supplied by others) to prevent unauthorised opening.

Defender Range

Our Defender range is a flush fitting that incorporates our Stamp-Lock mechanism. It is available in any size from 450 x 450mm clear opening to suit and chamber opening dimensions. The Defender range is suitable for all applications and can be security rated to LPS 1175 SR3/C5 and SR4/D10 when incorporating the Glidelock mechanism (SR4/D10 only).

Prolift

A flush fitting unit incorporating the Stamp-Lock locking mechanism, available in any size from 450mm x 450mm clear opening up to 3000mm x 2000mm. The Prolift range is suitable for all applications where the need for a seal is not a requirement.

Multi-Guard

This range of hinged cover and frame has been primarily designed for oversized chambers. With a modular design the Mult-Guard has no limit on the length of the chamber we can cover. This range includes both lift off and hinged cover sections which allows all sizes to be covered. The access cover provides high security when paired with the Stamp-Lock locking mechanism with a LPS 1175 SR3 security rating. Our Multi-Guard range includes our Multi-Guard 3 and Multi-Guard V3 Hinged Assist Lift Access Covers.

Upstand

Available in any size from 450 x 450mm clear opening to suit any chamber opening dimensions. The frame design allows for the grid to sit within the frame and thus not project into the chamber opening, ideal for all applications where an upstanding unit is acceptable.

Sentry

Approved to LPS 1175 issue 8 D10 or C5 security rating, the Sentry range design allows for suitable applications over potable water where security of seal and drawdown ventilation is required. The range incorporates a moated frame and inner cover which is sealed by a WRC approved sealing strip to ensure that the ingress of contaminated liquids is not possible.

Our range of Sentry access covers and roof hatches are below:

Sentry37

Sentry37 RH

Sentry47

Sentry47 RH

Our hinged access covers provide superior protection, easy accessibility and longevity, making them an ideal choice for any project. Contact us today to discover more or call 0121 521 4500.

EnquireDownload BrochuresDownload Brochures
No items found.

Why choose Steelway

From design through to manufacture and installation we work to the most exacting standards to provide quality products for all industrial applications. More than anything, we pride ourselves on customer service and our ability to produce the right product at the right price - right on time.

  • Market Leaders with over 90 years experience within the industry
  • Experienced Fabricators
  • Professional facilities such as laser cutting and off-site construction
  • Design fabrication and installation services

Bespoke fabrication

Steelway offer bespoke metalwork fabrication with a wide range of capabilities allowing for unique specifications as required by the customer. Tailor making metalwork to suit you. Our in-house drawing office will work with you to detail your requirements using the latest 3D software. This is complimented by our excellent fabrication & installations capabilities to enable us to fulfil your metalwork requirements.

Get in touch

Get in touch with our team to enquire about 
Hinged Assisted Lift Access Covers
Enquire
Copyright Steelway Fensecure Ltd 2023. All Rights Reserved. Steelway is part of the Northern Industries Family
Website by Gravitas

Hinged Assisted Lift Access Covers

Steelway's range of Hinged Assisted Lift Access Covers are designed for use on a variety of projects. Our hinged access covers are available with both flush fitting and upstanding options subject to the site requirements.

This range of hinged access covers and frames are designed for use on a variety of applications that require frequent opening. Also incorporating heavy gauge torsion springs for compliance with manual handling regulations. Available in a number of loadings in line with FACTA load classifications.

The range covers products that are suitable for pedestrian areas through to chambers that need to take vehicular loadings. The complete range is designed to accept utility padlocks (supplied by others) to prevent unauthorised opening.

Defender Range

Our Defender range is a flush fitting that incorporates our Stamp-Lock mechanism. It is available in any size from 450 x 450mm clear opening to suit and chamber opening dimensions. The Defender range is suitable for all applications and can be security rated to LPS 1175 SR3/C5 and SR4/D10 when incorporating the Glidelock mechanism (SR4/D10 only).

Prolift

A flush fitting unit incorporating the Stamp-Lock locking mechanism, available in any size from 450mm x 450mm clear opening up to 3000mm x 2000mm. The Prolift range is suitable for all applications where the need for a seal is not a requirement.

Multi-Guard

This range of hinged cover and frame has been primarily designed for oversized chambers. With a modular design the Mult-Guard has no limit on the length of the chamber we can cover. This range includes both lift off and hinged cover sections which allows all sizes to be covered. The access cover provides high security when paired with the Stamp-Lock locking mechanism with a LPS 1175 SR3 security rating. Our Multi-Guard range includes our Multi-Guard 3 and Multi-Guard V3 Hinged Assist Lift Access Covers.

Upstand

Available in any size from 450 x 450mm clear opening to suit any chamber opening dimensions. The frame design allows for the grid to sit within the frame and thus not project into the chamber opening, ideal for all applications where an upstanding unit is acceptable.

Sentry

Approved to LPS 1175 issue 8 D10 or C5 security rating, the Sentry range design allows for suitable applications over potable water where security of seal and drawdown ventilation is required. The range incorporates a moated frame and inner cover which is sealed by a WRC approved sealing strip to ensure that the ingress of contaminated liquids is not possible.

Our range of Sentry access covers and roof hatches are below:

Sentry37

Sentry37 RH

Sentry47

Sentry47 RH

Our hinged access covers provide superior protection, easy accessibility and longevity, making them an ideal choice for any project. Contact us today to discover more or call 0121 521 4500.

EnquireDownload BrochuresDownload Brochures
No items found.

Why choose Steelway

From design through to manufacture and installation we work to the most exacting standards to provide quality products for all industrial applications. More than anything, we pride ourselves on customer service and our ability to produce the right product at the right price - right on time.

  • Market Leaders with over 90 years experience within the industry
  • Experienced Fabricators
  • Professional facilities such as laser cutting and off-site construction
  • Design fabrication and installation services

Bespoke fabrication

Steelway offer bespoke metalwork fabrication with a wide range of capabilities allowing for unique specifications as required by the customer. Tailor making metalwork to suit you. Our in-house drawing office will work with you to detail your requirements using the latest 3D software. This is complimented by our excellent fabrication & installations capabilities to enable us to fulfil your metalwork requirements.

Get in touch

Get in touch with our team to enquire about 
Hinged Assisted Lift Access Covers
Enquire
+44 (0) 1902 490 919

sales@fensecure.co.uk

Queensgate Works,Bilston Road,
Wolverhampton,West Midlands,WV2 2NJ
Copyright Steelway Fensecure Ltd 2023. All Rights Reserved. Steelway is part of the Northern Industries Family
Website by Gravitas

Hinged Assisted Lift Access Covers

Steelway's range of Hinged Assisted Lift Access Covers are designed for use on a variety of projects. Our hinged access covers are available with both flush fitting and upstanding options subject to the site requirements.

This range of hinged access covers and frames are designed for use on a variety of applications that require frequent opening. Also incorporating heavy gauge torsion springs for compliance with manual handling regulations. Available in a number of loadings in line with FACTA load classifications.

The range covers products that are suitable for pedestrian areas through to chambers that need to take vehicular loadings. The complete range is designed to accept utility padlocks (supplied by others) to prevent unauthorised opening.

Defender Range

Our Defender range is a flush fitting that incorporates our Stamp-Lock mechanism. It is available in any size from 450 x 450mm clear opening to suit and chamber opening dimensions. The Defender range is suitable for all applications and can be security rated to LPS 1175 SR3/C5 and SR4/D10 when incorporating the Glidelock mechanism (SR4/D10 only).

Prolift

A flush fitting unit incorporating the Stamp-Lock locking mechanism, available in any size from 450mm x 450mm clear opening up to 3000mm x 2000mm. The Prolift range is suitable for all applications where the need for a seal is not a requirement.

Multi-Guard

This range of hinged cover and frame has been primarily designed for oversized chambers. With a modular design the Mult-Guard has no limit on the length of the chamber we can cover. This range includes both lift off and hinged cover sections which allows all sizes to be covered. The access cover provides high security when paired with the Stamp-Lock locking mechanism with a LPS 1175 SR3 security rating. Our Multi-Guard range includes our Multi-Guard 3 and Multi-Guard V3 Hinged Assist Lift Access Covers.

Upstand

Available in any size from 450 x 450mm clear opening to suit any chamber opening dimensions. The frame design allows for the grid to sit within the frame and thus not project into the chamber opening, ideal for all applications where an upstanding unit is acceptable.

Sentry

Approved to LPS 1175 issue 8 D10 or C5 security rating, the Sentry range design allows for suitable applications over potable water where security of seal and drawdown ventilation is required. The range incorporates a moated frame and inner cover which is sealed by a WRC approved sealing strip to ensure that the ingress of contaminated liquids is not possible.

Our range of Sentry access covers and roof hatches are below:

Sentry37

Sentry37 RH

Sentry47

Sentry47 RH

Our hinged access covers provide superior protection, easy accessibility and longevity, making them an ideal choice for any project. Contact us today to discover more or call 0121 521 4500.

EnquireDownload BrochuresDownload Brochures
No items found.

Why choose Steelway

From design through to manufacture and installation we work to the most exacting standards to provide quality products for all industrial applications. More than anything, we pride ourselves on customer service and our ability to produce the right product at the right price - right on time.

  • Market Leaders with over 90 years experience within the industry
  • Experienced Fabricators
  • Professional facilities such as laser cutting and off-site construction
  • Design fabrication and installation services

Bespoke fabrication

Steelway offer bespoke metalwork fabrication with a wide range of capabilities allowing for unique specifications as required by the customer. Tailor making metalwork to suit you. Our in-house drawing office will work with you to detail your requirements using the latest 3D software. This is complimented by our excellent fabrication & installations capabilities to enable us to fulfil your metalwork requirements.

Get in touch

Get in touch with our team to enquire about 
Hinged Assisted Lift Access Covers
Enquire
Copyright Steelway Fensecure Ltd 2023. All Rights Reserved. Steelway is part of the Northern Industries Family
Website by Gravitas

Hinged Assisted Lift Access Covers

Steelway's range of Hinged Assisted Lift Access Covers are designed for use on a variety of projects. Our hinged access covers are available with both flush fitting and upstanding options subject to the site requirements.

This range of hinged access covers and frames are designed for use on a variety of applications that require frequent opening. Also incorporating heavy gauge torsion springs for compliance with manual handling regulations. Available in a number of loadings in line with FACTA load classifications.

The range covers products that are suitable for pedestrian areas through to chambers that need to take vehicular loadings. The complete range is designed to accept utility padlocks (supplied by others) to prevent unauthorised opening.

Defender Range

Our Defender range is a flush fitting that incorporates our Stamp-Lock mechanism. It is available in any size from 450 x 450mm clear opening to suit and chamber opening dimensions. The Defender range is suitable for all applications and can be security rated to LPS 1175 SR3/C5 and SR4/D10 when incorporating the Glidelock mechanism (SR4/D10 only).

Prolift

A flush fitting unit incorporating the Stamp-Lock locking mechanism, available in any size from 450mm x 450mm clear opening up to 3000mm x 2000mm. The Prolift range is suitable for all applications where the need for a seal is not a requirement.

Multi-Guard

This range of hinged cover and frame has been primarily designed for oversized chambers. With a modular design the Mult-Guard has no limit on the length of the chamber we can cover. This range includes both lift off and hinged cover sections which allows all sizes to be covered. The access cover provides high security when paired with the Stamp-Lock locking mechanism with a LPS 1175 SR3 security rating. Our Multi-Guard range includes our Multi-Guard 3 and Multi-Guard V3 Hinged Assist Lift Access Covers.

Upstand

Available in any size from 450 x 450mm clear opening to suit any chamber opening dimensions. The frame design allows for the grid to sit within the frame and thus not project into the chamber opening, ideal for all applications where an upstanding unit is acceptable.

Sentry

Approved to LPS 1175 issue 8 D10 or C5 security rating, the Sentry range design allows for suitable applications over potable water where security of seal and drawdown ventilation is required. The range incorporates a moated frame and inner cover which is sealed by a WRC approved sealing strip to ensure that the ingress of contaminated liquids is not possible.

Our range of Sentry access covers and roof hatches are below:

Sentry37

Sentry37 RH

Sentry47

Sentry47 RH

Our hinged access covers provide superior protection, easy accessibility and longevity, making them an ideal choice for any project. Contact us today to discover more or call 0121 521 4500.

EnquireDownload BrochuresDownload Brochures
No items found.

Why choose Steelway

From design through to manufacture and installation we work to the most exacting standards to provide quality products for all industrial applications. More than anything, we pride ourselves on customer service and our ability to produce the right product at the right price - right on time.

  • Market Leaders with over 90 years experience within the industry
  • Experienced Fabricators
  • Professional facilities such as laser cutting and off-site construction
  • Design fabrication and installation services

Bespoke fabrication

Steelway offer bespoke metalwork fabrication with a wide range of capabilities allowing for unique specifications as required by the customer. Tailor making metalwork to suit you. Our in-house drawing office will work with you to detail your requirements using the latest 3D software. This is complimented by our excellent fabrication & installations capabilities to enable us to fulfil your metalwork requirements.

Get in touch

Get in touch with our team to enquire about 
Hinged Assisted Lift Access Covers
Enquire
+44 (0) 1902 921 525

protect@steelway.co.uk

Brickhouse Lane, West Bromwich,
West Midlands, B70 0DY
Copyright Steelway Fensecure Ltd 2023. All Rights Reserved. Steelway is part of the Northern Industries Family
Website by Gravitas

Hinged Assisted Lift Access Covers

Steelway's range of Hinged Assisted Lift Access Covers are designed for use on a variety of projects. Our hinged access covers are available with both flush fitting and upstanding options subject to the site requirements.

This range of hinged access covers and frames are designed for use on a variety of applications that require frequent opening. Also incorporating heavy gauge torsion springs for compliance with manual handling regulations. Available in a number of loadings in line with FACTA load classifications.

The range covers products that are suitable for pedestrian areas through to chambers that need to take vehicular loadings. The complete range is designed to accept utility padlocks (supplied by others) to prevent unauthorised opening.

Defender Range

Our Defender range is a flush fitting that incorporates our Stamp-Lock mechanism. It is available in any size from 450 x 450mm clear opening to suit and chamber opening dimensions. The Defender range is suitable for all applications and can be security rated to LPS 1175 SR3/C5 and SR4/D10 when incorporating the Glidelock mechanism (SR4/D10 only).

Prolift

A flush fitting unit incorporating the Stamp-Lock locking mechanism, available in any size from 450mm x 450mm clear opening up to 3000mm x 2000mm. The Prolift range is suitable for all applications where the need for a seal is not a requirement.

Multi-Guard

This range of hinged cover and frame has been primarily designed for oversized chambers. With a modular design the Mult-Guard has no limit on the length of the chamber we can cover. This range includes both lift off and hinged cover sections which allows all sizes to be covered. The access cover provides high security when paired with the Stamp-Lock locking mechanism with a LPS 1175 SR3 security rating. Our Multi-Guard range includes our Multi-Guard 3 and Multi-Guard V3 Hinged Assist Lift Access Covers.

Upstand

Available in any size from 450 x 450mm clear opening to suit any chamber opening dimensions. The frame design allows for the grid to sit within the frame and thus not project into the chamber opening, ideal for all applications where an upstanding unit is acceptable.

Sentry

Approved to LPS 1175 issue 8 D10 or C5 security rating, the Sentry range design allows for suitable applications over potable water where security of seal and drawdown ventilation is required. The range incorporates a moated frame and inner cover which is sealed by a WRC approved sealing strip to ensure that the ingress of contaminated liquids is not possible.

Our range of Sentry access covers and roof hatches are below:

Sentry37

Sentry37 RH

Sentry47

Sentry47 RH

Our hinged access covers provide superior protection, easy accessibility and longevity, making them an ideal choice for any project. Contact us today to discover more or call 0121 521 4500.

EnquireDownload BrochuresDownload Brochures
No items found.

Why choose Steelway

From design through to manufacture and installation we work to the most exacting standards to provide quality products for all industrial applications. More than anything, we pride ourselves on customer service and our ability to produce the right product at the right price - right on time.

  • Market Leaders with over 90 years experience within the industry
  • Experienced Fabricators
  • Professional facilities such as laser cutting and off-site construction
  • Design fabrication and installation services

Bespoke fabrication

Steelway offer bespoke metalwork fabrication with a wide range of capabilities allowing for unique specifications as required by the customer. Tailor making metalwork to suit you. Our in-house drawing office will work with you to detail your requirements using the latest 3D software. This is complimented by our excellent fabrication & installations capabilities to enable us to fulfil your metalwork requirements.

Get in touch

Get in touch with our team to enquire about 
Hinged Assisted Lift Access Covers
Enquire

CEL Sheet Metal Ltd is a UK based sheet metal and assembly business, offering a variety of services that can effectively replace your existing sub-contract manufacturing requirements.

+44 (0) 1952 200 741
sales@celsheetmetal.com
Stafford Park 11
Telford
Shropshire
TF3 3AY
Copyright CEL Sheetmetal ltd 2023. All Rights Reserved.   Privacy Policy   |    Terms of Service    |    Website by Gravitas